广州力净智能科技有限公司

广州力净智能科技有限公司

洗衣房的全面解决方案
电话138-0283-7518
QZ-6型真空抽湿冷热去渍台

信息来源于:广州力净智能科技有限公司 发布于:2022-10-25

本机(QZ-6型真空抽湿冷热去渍台)是我公司制造的干洗、水洗熨烫设备的一分支产品,它适用于宾馆。饭店、洗衣中心,去除织物上的各种污渍。它使工作轻松,节约药水,是去除污渍的理想工具。
HAS-2 Vacuum stain-removal machine is one part of our dry-cleaning, washing and ironing equipment, adaptable to hotels, restaurants, as well as washing centers. With its high stain-removal and abluent-saving capacities, it’s undoubtedly an ideal washing tool. 

1、性能特点 (Capacities)  
本机采用强力真空抽湿、冷热去渍,并配置冷去渍枪两把,蒸汽去渍枪一把。台面、水箱都采用优质不锈钢制作,经久耐用,整机可分体组合,便于运输及维修。

HAS-2 machine erases the dirtiness by high vacuum, cold and heat steamer, equipped with two cold-steamed and one heat-steamed gun. The surface and the water tank are made of qualified stainless steel, which is practical and durable. Besides, the machine can be separated and reassembled, convenient for transportation and repair.

2、去渍注意事项(Attention)
本机另设有存放去渍药水盘,在使用前应将去渍瓶摆放在药水盘上的指定位置,这样将不会弄错去渍剂。
  With a special plate to hold the cleanser, no mistake can be made when putting the cleanser on the right place of the plate before use.

  在使用去渍枪进行吹蒸汽时,应将喷枪保持一定的距离,否则将会损坏织物。保持去渍台刷子、瓶子清洁,处理完一件衣服之后,应将去渍台上的去渍剂和其他污物打扫干净,以避免污渍从一件衣服传到另一件衣服上,如果发生掉色应用毛巾擦净工作台,避免液水等冲到去渍网。在敲打织物时应将刷子下面蘸上液体保持湿润,请记住是去渍剂发挥作用,而不是机械运动。
    When using the gun, please keep a distance from the target in case of damage. Keep tide of the brush and bottle. Clear the cleanser and other dirties after one clothes, to make sure dirties can’t transfer from one to another. In case of depigmentation, clear the table with a towel, and keep the new away from the water. When beating the clothes, keep the brush wet. Please bear in mind that it’s the cleanser, not the movement that works.

3、去渍剂品种(kinds of cleansers)
(1)油性颜料去渍剂;(2)挥发性、干性溶剂;(3)蛋白去渍剂;(4)醋酸酯;(5)湿性去渍剂;(6)丹宁酸去渍剂;(7)醋酸;(8)除锈剂;(9)氨水;(10)漂白剂

1.oil-based paint cleanser 2. volatile, dry solvent  3.albumen cleanser  4.acetate 5. dampness cleanser  6.tannin cleanser  7.acetic acid  8.deruster 9.ammonia  10.bleach

4、安装注意事项(installation )
(1)插入钢支架,装紧固定螺丝;

Fix the bracket, tighten the screw
(2)去渍台便于运输及包装,使用前请把7字不锈钢管安装在本机后边已固定的螺栓,装紧即可;(2) convenient transportation and table, please use packing before 7 stainless steel pipe installation in the back of the bolt, already fixed tightly then,
This machine is convenience to transport and pack, before use, please install the 7 stainless steel pipe in the back of the fixed bolt, then fix tightly.
          
(3)外接:蒸汽源和本机电磁阀直接对接;
the steam source connects the magnet valve directly

(4)外接:空气压缩机和本机空气过滤器连接。
air compressor connects air filter

(本去渍台需外接蒸汽、空气压缩机提供气源)
this machine needs the support of steam source from the air compressor)